TE Text Editor Command Line .te [path/]filename Most keys work like in the ZX Spectrum's BASIC editor, with the differences summarized in this table: BREAK exit .TE UP arrow line cursor one line UP or character cursor HOME DOWN arrow line cursor one line DOWN or character cursor END LEFT arrow character cursor LEFT or page UP RIGHT arrow character cursor RIGHT or page DOWN DELETE delete character to the left of character cursor G mode DELETE delete all characters to the left of character cursor G mode 0 delete all characters after character cursor EDIT edit line pointed by line cursor ss + SPACE insert line pointed by line cursor into edited line at character cursor ENTER insert edited line into file or replace edited line G mode ENTER split edited line at character cursor and insert both into file cs + ENTER join edited line with the one pointed by line cursor ss + ENTER like ENTER, but toggle line ending between CR (CHR$ 13) and LF (CHR$ 10) .TE Description A tool for editing esxDOS text files, expecially, though not exclusively configuration files. It works with both CR (ZX Spectrum style) and LF (Unix style) line endings. MSDOS style line endings CR + LF look like double spacing, but can be managed with some care as well. The user interface mostly follows ZX conventions, with an editing area (console) at the bottom of the screen and the edited document at the top. There is no explicit SAVE functionality, hitting ENTER immediately commits the changes into the file. In case of a crash, the file might be available at the /tmp/te.tmp location. The editor buffer resides in esxDOS memory, only the edited line takes space from the ZX Spectrum's OS, so it is possible to edit large files even when there is very little free memory left.