============================================================== Dot-Commands for esxDOS and MB03+ Ulltimate interface ----------------------------------------------------- are simple tools for reporting the status of a peripheral and also for switching its basing settings MB-DOT-CMDs were prepared with and for the ZXDIR.ROM, a smart ZXROM for active esxDOS users (esxdos.samcoupe.cz). TO-DO: - complete check of parameters, incl. "bad value" reporting - 64KB ROM support in MBROM Asm sources for LnxAssembler (www.ilnx.cz) are included. ============================================================== .MBDMA v0.2 Z80-DMA Chip Switcher ---------------------------------- usage: MBDMA to switch, MBDMA 1 to set on, MBDMA 0 for off .MBJOY v0.2 Kempston Joystick Switcher --------------------------------------- usage: MBJOY to switch, MBJOY 1 to set on, MBJOY 0 for off .MBROM v0.1 CustomROM Control ------------------------------ usage: MBROM ... reports only (64KB +3 ROMs as no.A and B) MBROM 0 ... switches any CustomROM off MBROM n ... switches the 16KB CustomROM n on, n=[1..8] .MBRTC v0.1 RTC Chip Control ----------------------------- usage: MBRTC ... reports date and time MBRTC dDDMMYY ... sets date, d=[MTWHFAS] Mon/Tue/Wed/tHu/Fri/sAt/Sun MBRTC mHHMMSS ... sets time, m=[AP] AM/PM .MBSAA v0.2 SAA1099 Sound Chip Switcher ---------------------------------------- Usage: MBSAA to switch, MBSAA 1 to set on, MBSAA 0 for off .MBTMX v0.2 Timex Graphics Switcher ------------------------------------ Usage: MBTMX to switch, MBTMX 1 to set on, MBTMX 0 for off .MBULA v0.2 Palette of ULA+ Switcher ------------------------------------- Usage: MBULA to switch, MBULA 1 to set on, MBULA 0 for off